Construction
Equipment
Coating That
Holds Up.
Jobsite chemicals, abrasion, and UV exposure degrade equipment fast. InduroPro ceramicized epoxy bonds to painted and metal surfaces on skid steers, dozers, excavators, and heavy machinery — protecting appearance, resale value, and performance.
Construction Equipment Takes More Abuse Than Paint Can Handle
Jobsite conditions are relentless. Concrete chemicals, salt, abrasive soils, and constant UV wear down equipment finishes fast — costing you in maintenance, downtime, and lost resale value.
Concrete mixers, excavators, and dozers face constant contact with lime, calcium chloride, and chemical solvents. These attack paint at a molecular level — causing blistering, peeling, and rust that starts from the surface inward.
Daily operations put equipment in contact with gravel, aggregate, and debris. Cabs, panels, and undercarriages accumulate micro-scratches that eventually expose bare metal — the starting point for corrosion.
Equipment in open sun fades fast. A skid steer or dozer that looked sharp at delivery can look years older within a single season. Faded equipment signals hard use and depreciates faster at auction or trade-in.
Hydraulic cylinder exteriors, step rails, brackets, and cab hardware rust first. Once surface corrosion starts on construction equipment, it spreads quickly — especially in coastal, high-humidity, or winter salt environments.
Built for the Jobsite
InduroPro is a ceramicized epoxy coating — not a wax, sealant, or temporary shine. It forms a durable, semi-permanent barrier that protects painted and bare metal surfaces against the specific stresses construction equipment faces every day.
Resists concrete, lime, oils, diesel overspray, solvents, and acid washes. Creates an inert barrier between destructive chemicals and your equipment's painted or metal surface — breaking the corrosion cycle before it starts.
UV-blocking chemistry locks in color depth and gloss on cabs, panels, and exterior surfaces. The CAT Skid Steer project at Gillett Shine Works demonstrated enhanced gloss on a machine less than 2 years old — before serious UV degradation could set in.
The high-solids ceramicized formula adds a hardened layer over painted surfaces, resisting scuffs, micro-abrasions, and light impact wear. Ideal for panels, cabs, and structural components that take direct contact with jobsite materials.
Seals metal and painted surfaces against moisture intrusion. Applied to hydraulic cylinder exteriors, step rails, brackets, and chassis stress points — the specific zones that corrode first on construction equipment in heavy use.
InduroPro applies to existing painted surfaces in hours — not days. No full strip, no primer coats, no waiting on paint cure cycles. Equipment goes back to work the same day, protecting your production schedule and daily revenue.
Komatsu D155AX Dozer — Guardian Pro Systems,
Broussard, LA
Guardian Pro Systems in Broussard, Louisiana applied InduroPro to a reconditioned Komatsu D155AX dozer to protect the freshly restored finish before the machine returned to active jobsite use. The full painted chassis was coated using 3 × 17 oz kits, sealing the surface against UV fading, chemical exposure, and moisture-driven corrosion. The result was enhanced gloss, sealed painted metal surfaces blocking oxidation, and proactive protection that preserves the machine's condition and reduces long-term maintenance costs across its service life.
— Sealed painted metal surfaces to block moisture and oxidation
— UV and chemical protection locked in before jobsite exposure
— Reconditioned machine preserved at peak condition for resale value
WANT TO SEE WHAT INDUROPRO CAN DO FOR YOUR EQUIPMENT?
Request a QuoteInduroPro vs. The Alternatives
How InduroPro compares to generic ceramic coatings and traditional repainting for construction equipment.
| Feature | InduroPro | Ceramic Coating | Standard Repaint |
|---|---|---|---|
| Jobsite chemical resistance | Ceramicized epoxy barrier | Topical protection only | Paint degrades on contact |
| UV & fade protection | 85% UV-blocking formula | Disappears after max 1 year | Fades over 1–2 seasons |
| Abrasion resistance | High-solids hardened layer | Varies | Paint only |
| Maintenance & cleanability | Clean with any cleaners, acids & power wash | Only with ceramic-friendly soaps | Most soaps & cleaners fade paint |
| Applies without full repaint prep | One-coat application over clean surfaces | Must prep paint for application | — |
| Cost vs. full repaint | Fraction of full repaint cost | Mid-range pricing | $2,000–$15,000+ per machine |
| Scalable for fleet use | Kit-based, orderable at scale | Per-vehicle model | Volume shop discounts only |
| Proven on construction equipment | Proven — United Rentals | — | — |
InduroPro isn't a wipe-on ceramic or a repaint. It's a two-part epoxy that chemically bonds to metal and painted surfaces at the molecular level. Learn exactly how it works.
Learn How It Works →The Questions Every Operator Asks. Answered.
A professional repaint runs $1,500–$10,000+ per cycle. InduroPro is $1,199 once, guaranteed 5 years. See the full cost breakdown, fleet ROI data, and real operator proof.
See the Numbers →We guarantee 5 years. Here's the 6-month and 1-year field data from real equipment in ag, construction, and fleet — and the science behind the promise.
See Field Data →Repainting costs thousands and takes your machine out of service for 7 days. InduroPro is back in service in 24 hours with 5 years of protection. See the side-by-side comparison.
See the Comparison →Registered applications are guaranteed for a minimum of 5 years against coating delamination and product failure. This is what standing behind your product looks like.
Read the Guarantee →Ready to Stop the Jobsite from Destroying Your Equipment?
Get a personalized quote based on your equipment list, book a call with our team, or order direct. We respond within 2–3 business days on quote requests.
