How Long Does
InduroPro
Last?

Yes. InduroPro bonds directly to painted surfaces without sandblasting or stripping. On painted surfaces, clean with acetone to remove grease, contaminants, and any loose material — then apply. No primer, no topcoat, no shop time. This is one of the fundamental differences between InduroPro and a repaint, which requires a full sand-down before any paint can adhere. InduroPro adds a ceramicized epoxy barrier over your existing finish in a single coat, without pulling the machine out of service for prep work.

Twenty-four hours to light service. InduroPro is tack-free in 4–6 hours and reaches full mechanical hardness in 24 hours at 70°F. A professional repaint requires 7 days minimum for full cure before returning to heavy use — and that's after the prep and application time. For operators running equipment on tight schedules, the difference between one day and one week out of service is a real number on the bottom line.

No. Repainting restores appearance — it does not add corrosion resistance, UV blocking, or chemical protection. Factory paint and shop repaints have no ceramicized chemistry. They fade under UV, degrade on contact with fertilizer, acid, and road brine, and offer no barrier against rust once surface abrasion begins. InduroPro's ceramicized epoxy formula is specifically engineered to resist these forces — delivering 85% UV protection, resistance to fertilizer, muriatic acid, calcium chloride, and hydraulic fluid, and a hard-bonded barrier that holds where paint alone never will.

InduroPro's guarantee covers two specific failure conditions: coating delamination and product failure under normal operating conditions within 5 years of a registered application. If InduroPro peels, separates, or fails to perform as described, your guarantee covers it. The guarantee does not cover mechanical abrasion, unregistered applications, improper surface prep, or pre-existing damage present at the time of application. Registration must be completed within 30 days of your install date to activate coverage. Read the full guarantee →

No. InduroPro bonds directly to existing paint, primer, powder coat, and bare metal without requiring a repaint first. On painted surfaces, clean with acetone to remove grease and contaminants — then apply. On bare metal, clean with xylol xylene. No sandblasting, no stripping, no shop time. If your equipment has faded or oxidized paint that's still structurally sound, InduroPro goes right over it, restores the gloss, and seals it in with a ceramicized epoxy barrier. The only time a repaint makes sense before InduroPro is if the existing paint is peeling, delaminating, or severely compromised — in which case Guardian Pro Systems offers professional prep and application nationwide. For the vast majority of machines, InduroPro is the repaint alternative, not the repaint companion.