Honda Pioneer 1000-5 Full Protection Coating with InduroPro | North Louisiana

project overview

COVERAGE: FULL COVERAGE. UNDERCARRIAGE. ROOF. BED LINER. EVERY BOLT.

KITS USED: 4 X 17 OZ KITS OF INDUROPRO
1 8.5 OZ KIT OF INDUROPRO

LOCATION & APPLICATOR: NORTHERN LOUISIANA
THE BOATLER - CERTIFIED INDUROPRO INSTALLER

TYPE OF EQUIPMENT: HONDA PIONEER 100-5

CONDITION: HEAVY USE. ~3 YEARS OLD

project results: protection where it counts

01

42 WASHES. THEN INDUROPRO.
It took 42 pressure washes to remove the caked-on mud before acetone prep and application. What came out the other side is a Pioneer 1000-5 sealed for years of outdoor use.
02

INDUROPRO ON EVERY SURFACE.
Full exterior, undercarriage, floor, roof top and underside, inside of the dump bed, bed liner, all metal piping and bolts, and every wheel. Nothing skipped.
03

4.5 KITS. COMPLETE PROTECTION.
Four and a half kits of InduroPro ceramicized epoxy provided complete coverage on this Honda Pioneer 1000-5 from top to bottom, inside and out.
04

CAMO PROTECTED & EASIER TO CLEAN.
The camo finish on this Pioneer is now sealed against UV fading and chalking with InduroPro ceramicized epoxy backing it for a minimum of five years.

OUTDOOR UTILITY VEHICLES AND HARD USE. PROTECTION THAT KEEPS UP.

THIS PIONEER 1000-5 LIVES IN THE FIELD. NOW ITS FULLY PROTECTED WITH INDUROPRO.

Side-by-side UTVs built for outdoor recreation take a category of abuse that most equipment never sees. Mud, water, UV exposure, chemical contact from fertilizers and field treatments, impact from debris, and the constant wear of outdoor terrain cycling through every season. The surfaces of a working UTV face all of it at once. Unprotected paint fades, chalks, and oxidizes. Unprotected metal under the machine rusts. Unprotected bed liners and floor surfaces accumulate buildup that bonds to the surface and gets harder to remove with every outing. For an outdoorsman who depends on his machine season after season, that slow degradation is an accepted cost of hard use.

This North Louisiana customer decided it didn't have to be. Before a certified InduroPro installer applied a single drop of ceramicized epoxy, the Pioneer 1000-5 required 42 pressure washes to remove the caked-on mud and field buildup that had accumulated through hard outdoor use. Once every surface was clean, all surfaces were wiped down with acetone and the full coating process began. Every surface. Inside and out. Top to bottom. 4.5 kits of InduroPro covering every painted panel, every piece of exposed metal, every wheel, and every interior surface this machine has. The result is a Pioneer 1000-5 that is sealed for years of outdoor use and protected against everything the field throws at it.

PROTECT WHAT YOU USE.

FROM FULLY CAKED-ON MUD TO FULLY SEALED. THIS IS WHAT INDUROPRO DOES.

The before image tells you everything you need to know about how this Pioneer 1000-5 gets used. Caked-on mud covering every surface from wheels to roof. This is what a machine looks like after real outdoor use in North Louisiana. It took 42 pressure washes to get back to bare surface.

The after image at the bottom of this project is the same machine from the same angle. Every surface cleaned, acetone prepped, and coated with InduroPro ceramicized epoxy by a certified installer. The camo finish is deep and protected. The exterior panels are high-gloss and sealed. The wheels are clean and coated. What looked like a machine that had been surrendered to the field came back as a Pioneer 1000-5 built to handle whatever comes next and clean up fast when it does.

THE SCOPE OF THE APPLICATION. NOTHING WAS SKIPPED.

UNDERCARRIAGE. EXTERIOR. ROOF. BED LINER. WHEELS. FULLY COATED.

Most InduroPro applications cover the exterior panels and call it done. This one went further. The certified installer coated the full exterior, the undercarriage, the floor, the top of the roof and the underside of the roof, the inside of the dump bed, the top of the bed liner for easy cleanup and high-gloss finish, all metal piping, all bolts, and every wheel on the machine. 4.5 kits of InduroPro ceramicized epoxy applied surface by surface, inside and out, until every part of this Pioneer 1000-5 that could corrode, fade, or accumulate buildup was sealed. This is full protection. Not a detail job. Not a cosmetic touch-up. Every surface this machine has, covered.

AFTER APPLICATION, THE PIONEER 1000-5 IS FULLY PROTECTED.

HIGH-GLOSS. SEALED. EASY TO CLEAN. READY FOR THE FIELD.

The post-application walkaround tells the story surface by surface. Exterior panels deep and glossy, camo finish sealed against the UV fading and chalking that breaks down unprotected finishes over seasons of outdoor exposure. Wheels coated and protected. Roof clean and sealed top and underside. Bed liner locked in with InduroPro's high-gloss barrier that makes cleanup faster and easier after every outing. Undercarriage, floor, piping, bolts. Every surface that accumulates mud, moisture, and field exposure now has a ceramicized epoxy barrier between it and the conditions that cause corrosion and degradation.

Cleanup after a day in the field used to mean pressure washing a machine that held onto everything. With InduroPro sealed over every surface, mud and debris release faster, buildup doesn't bond the way it does on unprotected surfaces, and the machine stays in better condition between uses without additional maintenance effort. 4.5 kits. One certified installation. Five-year guarantee on every surface treated.

INDUROPRO FOR OUTDOOR AND RECREATIONAL VEHICLES. BUILT FOR HARD USE.

PROTECT EVERY SURFACE. EVERY SEASON. FROM THE INSIDE OUT.

UTVs and side-by-side recreational vehicles face a combination of surface threats that most equipment never encounters in the same session. UV radiation on the exterior, mud and moisture on the undercarriage, chemical exposure from field treatments and fertilizers, physical abrasion from debris and terrain, and the constant cycle of heavy use and cleanup that wears unprotected surfaces down faster than outdoor operators expect. Standard paint and bare metal have no lasting defense against that combination. InduroPro ceramicized epoxy coating does.

Applied once by a certified InduroPro installer over properly prepped surfaces, InduroPro seals every treated surface against UV fading, rust, corrosion, chemical exposure, and the buildup that makes cleanup harder over time. The Honda Pioneer 1000-5 in North Louisiana is the most comprehensive application of InduroPro on a recreational vehicle on record. Every surface covered. Every inch protected. Five-year guarantee. For outdoor enthusiasts who depend on their machines season after season and want to protect that investment from the inside out, this Pioneer 1000-5 is the proof of what full protection looks like.

VIEW MORE PROJECTS AND SEE INDUROPRO AT WORK!