Concrete Mixer Coating — 4 Month Follow Up Results
project overview
COVERAGE: FULL CEMENT MIXER BODY
WHEELS & RIMS
REINFORCED PITTED AREAS
KITS USED: 6 X 17 OZ KITS OF INDUROPRO
LOCATION & APPLICATOR: MOBILE, AL
THE INDUROPRO TEAM
TYPE OF EQUIPMENT: CONCRETE TRUCK
CONDITION: HEAVY USE. 8 YEARS OLD W/ PITTED SUBSTRATE
project results: protection where it counts
- 01
ACID-WASH RESISTANT
InduroPro showed no breakdown or degradation after chemical cleaning.
- 02
EASY CLEANUP
Hardened concrete and grime released quickly with minimal effort
- 03
LONG-TERM DURABILITY
InduroPro remained intact after four months of extreme jobsite conditions.
- 04
REDUCED MAINTENANCE TIME
Faster cleaning means les downtime and more time in service.
FOUR MONTHS OF REAL-WORLD ABUSE
PROVEN PROTECTION AFTER HEAVY USE AND ACID CLEANING
Four months after the original InduroPro demo, the MMC concrete truck was brought back for evaluation—intentionally left unwashed so MMC’s team could see exactly how the coating performed under real operating conditions. Over months of daily use, the truck accumulated hardened concrete, dirt, road grime, and jobsite residue across the drum and chassis.
After a single acid wash followed by a power rinse, the results were clear. The InduroPro coating remained intact and fully functional, showing no degradation, no failure, and no loss of protection. The surface cleaned up easily, confirming InduroPro’s resistance to harsh cleaning chemicals and its ability to simplify maintenance in demanding concrete operations.
4-MONTH FOLLOW UP
CONCRETE MIXER COATING — REAL-WORLD DURABILITY AFTER 4 MONTHS OF HEAVY USE
Four months after InduroPro was applied to a heavily used concrete mixer in Mobile, Alabama, the team returned to inspect the coating's performance under real-world operating conditions. This wasn't a controlled test — the mixer had been running continuous pours, exposed to wet concrete, calcium chloride, aggregate abrasion, and the daily wear that destroys standard paint in weeks.
The original application covered the full cement mixer body, wheels, rims, and reinforced pitted areas using 6 × 17 oz kits of InduroPro ceramicized epoxy. The machine was 8 years old with heavy use and significant substrate pitting at the time of application.
At the 4-month follow-up, the InduroPro coating remained fully intact across all treated surfaces. No chipping, no peeling, no delamination — even on the pitted areas that had been reinforced during the original application. The wheels and rims, which take direct contact with concrete splash and road debris, showed no signs of coating breakdown.
This matters because concrete equipment is notoriously difficult to keep protected. The alkaline chemistry of wet concrete, combined with physical abrasion from aggregate and the constant moisture cycle, creates conditions that standard paint simply cannot survive long-term. InduroPro's ceramicized epoxy matrix bonds at a molecular level, creating a barrier that resists both chemical attack and physical impact.
For construction operators considering a protective coating for concrete equipment, this 4-month follow-up demonstrates that InduroPro delivers measurable, real-world durability — not just a fresh appearance that fades within the first season of active use.
BUILT FOR LONG-TERM SERVICE
INDUROPRO AS A MAINTENANCE-REDUCING INVESTMENT
Concrete trucks operate in one of the harshest environments for coatings, facing abrasive material, chemical cleaners, and constant washdowns. Four months in, this follow-up confirmed that InduroPro is not a temporary surface treatment—it’s a ceramicized epoxy coating engineered to stay intact under repeated abuse.
Unlike waxes or wipe-on ceramic products that degrade quickly under chemical cleaning, InduroPro forms a durable, bonded barrier that protects surfaces while making routine maintenance faster and easier. For MMC, that means less time spent cleaning, reduced surface degradation, and a truck that stays protected and professional throughout its service cycle.
InduroPro
View full details
